DIY: Resin Tray Tutorial with NuClear Epoxy!


DIY: Resin Tray Tutorial with NuClear Epoxy!

The NuClear Epoxy resin candy tray is complete! Check out the video to get a brief breakdown of how we did it! What would you put in a resin tray? The possibilities are endless!

Click HERE to watch the full tutorial on YouTube 


  • Camille

    Hi Jenny! The best way to do this would be to create a removable form (made of plastic or wood) for the table and then embed the 3D objects with layers of clear resin similar to how we embedded the candy pieces for this tray. Creating a removable base for the table may be a bit tricky, but I’ve seen people use a thick removable plastic sheets or a wood sheet covered with tape as well. The finished table will probably require some sanding to smooth everything out so keep that in mind as well.

    Depending on the size of your table, you could also create a silicone mold that you then pour the resin into with your embedded 3D objects. Here is an example from Smooth-On using that technique: I hope this helps!

  • Jenny Slocum

    How can I make a table with 3D objects but with clear edges?

Leave a comment

Please note, comments must be approved before they are published